The use of precision air conditioning will produce noise, so do you knowwhere the noise of precision air conditioning comes from?

1. Air outlet

When the wind speed of the air outlet of the air conditioner increases, the noise of the precision air conditioner in the equipment room also increases relatively.

Second, the air conditioning panel

When the precision air conditioner is used for a long time, if the air conditioner panel becomes loose, the air conditioner will vibrate and generate noise during operation.

3. Fan

One of the noise sources of precision air conditioning in the machine room is the operation of the fan. When the noise is too loud, it will be unbearable.

4. Installation

When the connection between the indoor unit of the air conditioner and the outdoor unit is unstable, the installation of the indoor unit is unstable, causing resonance to produce unbearable noise.

How to reduce noise

1. The installation of precision air conditioners in the equipment room must pass through, so as to avoid the noise caused by the inadequate installation.

2. Adopt high efficiency and low noise fan. If possible, use a centrifugal fan with backward blades, and the working point of the fan operation is at or close to the highest efficiency point of the fan, and the noise power level generated by the fan operation is the lowest. The fan adopts the direct coupling type or coupling transmission mode as much as possible to avoid the noise generated by the belt transmission.

3. Periodically check the operation status of the precision air conditioner and perform necessary maintenance to avoid problems such as loose panels.

Precision air conditioning , precision power distribution cabinet in the machine room ,Computer room micro-module battery